| 주요논문 (최근 5년간) |
- • Kim, J., Chrenka, H., Boehman, A, Han, T. (2024) “Combined effects of catalysts and cosolvent on biocrude production from hydrothermal liquefaction (HTL) of microalgae”, Fuel, 2024-rev, http://dx.doi.org/10.2139/ssrn.4962679
• Han, T., Bhadra, K., Solbrig, C., Middleton, R., Lavoie, G., Wooldridge, M., Boehman, A. (2024) “Spark knock: A source for particulate matter emissions from gasoline spark ignited engines”, Combustion and Flame, 2024, 269(113712), doi:10.1016/j.combustflame.2024.113712
• Kim, S., Mehraj, H., Han, T., Lee, T., Kim, K., Kweon, K., Ryu, J. (2024) “Modeling approach and simulations of mechanical wall stress caused by thermal-spray impacting hot surfaces”, ICLASS 2024, https://hal.science/hal-04668954/
• Han, T., Koo, J. (2024) “Machine Learning Based Surrogate Models for Knock Prediction in Syngas (H₂/CO) Added SI Engine Combustion”, Journal of Energy & Climate Change 19 (1), 49-60, https://data.doi.or.kr/10.22728/jecc.2024.19.1.049
• Soto, L., Han, T., Boehman, A. (2024) “Effects of Dimethyl Ether and Propane Blends on Knocking Behavior in a Boosted SI Engine”, SAE Int Journal of Engines, 2024;17(7):1200-1222, doi:10.4271/03-17-07-0056
• Son, M.*, Yu, W.*, Kim, S-E., Han, J., Han, T. (2024) “Performance and Sustainability Analyses of Hydrogen-Based Mobilities”, KOSECC-fall conference.
• Rohwer, J.*, Han, T.*, Shah, A., Rockstroh, T. (2023) “Investigations into EGR dilution tolerance in a pre-chamber ignited GDI engine”, Int Journal of Engine Research, 2023;24(3):1200-1222, doi:10.1177/14680874221084777
• Han, T. and Boehman, A. (2022) “Multiple injection strategies with high water port injection rates for enhancing performance and emissions in a boosted SI engine”, Fuel, 2022, doi:10.1016/j.fuel.2022.124982
• Dagle, V., Affandy, M., Lopez, J., Cosimbescu, L., Gaspar, D., Goldsborough, S., Rockstroh, T., Cheng, S., Han, T., Kolodziej, C., Hoth, A., Majumdar, S., Pihl, J., Alleman, T., Hayes, C., McEnally, C., Zhu, J., and Pfefferle, L. (2022) “Production, Fuel Properties and Combustion Testing of an Iso-Olefins Blendstock for Modern Vehicles”, Fuel, 2022, doi:10.1016/j.fuel.2021.122314
• Zhu, M., Medina, M., Nalliah, R., Kadhium, V., Bell, E., Han, T., Boehman, A., Capecelatro, J. and Wooldridge, M., (2022) "Experimental evaluation of aerosol mitigation strategies in large open-plan dental clinics", The Journal of the American Dental Association, 2021, doi:10.1016/j.adaj.2021.07.030.
• Zhang, Z., Han, T., Yoo, K., Capecelatro, J., Boehman, A., and Maki, K. (2021) “Disease transmission through expiratory aerosols on an urban bus”, Physics of Fluids, 2021, doi:10.1063/5.0037452
• Singh, R., Han, T., Fatouraie, M., Mansfield, A., Wooldridge, M., and Boehman, A. (2021) “Influence of Fuel Injection Strategies on Efficiency and Particulate Emissions of Gasoline and Ethanol Blends in a Turbocharged Multi-cylinder Direct Injection Engine”, International Journal of Engine Research, 2021, doi:10.1177/1468087419838393
• Han, T., Singh, R., Lavoie, G., Wooldridge, M., and Boehman, A. (2020) “Multiple Injection for Improving Knock, Gaseous and Particulate Matter Emissions in Direct Injection SI Engines”, Applied Energy, 2020, doi:10.1016/j.apenergy.2020.114578
• Han, T., Lavoie, G., Wooldridge, M., and Boehman, A. (2018). “Dual Fuel Injection (DI + PFI) for Knock and EGR Dilution Limit Extension in a Boosted SI Engine”, SAE Tech. Paper, doi:10.4271/2018-01-1735
• Han, T., Lavoie, G., Wooldridge, M., and Boehman, A. (2017). “Effect of Syngas (H2/CO) on SI Engine Knock under Boosted EGR and Lean Conditions”, SAE International Journal of Engines, 10(1), pp 959-969. doi:10.4271/2017-01-0670.
• Sul, H., Han, T., Bieniek, M., Hoard, J., Kuan, C., and Styles, D. (2016) "The Effects of Temperature, Shear Stress, and Deposit Thickness on EGR Cooler Fouling Removal Mechanism - Part 2", SAE International Journal of Materials and Manufacturing, 9(2):2016, doi:10.4271/2016-01-0186.
• Han, T., Sul, H., Hoard, J., Kuan, C., and Styles, D. (2016) "The Effects of Temperature, Shear Stress, and Deposit Thickness on EGR Cooler Fouling Removal Mechanism - Part 1", SAE International Journal of Materials and Manufacturing, 9(2):2016, doi:10.4271/2016-01-0183.
• Han, T., Booth, A., Song, S., Styles, D., and Hoard, J. (2015). “Review and A Conceptual Model of Exhaust Gas Recirculation (EGR) Cooler Fouling Deposition and Removal Mechanism” Proceedings of the Int. Conf. on Heat Exchanger Fouling and Cleaning - 2015, http://www.heatexchanger-fouling.com/papers/papers2015/20_Han_F.pdf
|
